Radiant Floor Heating System for Existing Floors
Designed for:
- Existing Floors
- Laminate Flooring
- Floating Engineered Wood
- Luxury Vinyl Flooring
- Floating Tile
- Traditional Floor Tile
- Natural Stone Tile
- Marble Tile Flooring
- Carpet Flooring
Energy use Calculator
ESTIMATED COST
8 hours per day
DAILY
MONTHLY
Radiant Floor Heating System for Existing Floors
Electric Floor Heating Systems - Existing Floors
Product Information
QuietWarmth radiant heat film for under subfloors is the perfect solution to add comfort and warmth to any existing flooring, including nail-down wood floors and carpet. Simply place the mats between the subfloor joists and run pre-attached lead wires to an available thermostat. Completely unseen, under subfloor heating panels, warm existing floor surfaces for unparalleled comfort.
Since it is an electric floor heating system, there are no hot water pipes to worry about, thick electrical cables to bury in cement, and most of all no messy installation. Install retro-fit radiant heat to any of your existing floors to add gentle heat for your feet.
The system is incredibly easy to install and can be cut to fit-to-length.
Available in the following sizes in both 120v and 240v:
16" x 5' (6.67 sq ft)
16" x 10' (13.33 sq ft)
16" x 15' (20 sq ft)
120V Heating Panels
| PRODUCT ID | MATT DIMENSIONS | WATTS | AMPS |
|---|---|---|---|
| QWJOIST17X5120 | 16" x 5' | 47.53 | 0.4 |
| QWJOIST17X10120 | 16" x 10' | 95.06 | 0.79 |
| QWJOIST17X15120 | 16" X 15' | 151.62 | 1.26 |
240V Heating Panels
| PRODUCT ID | MATT DIMENSIONS | WATTS | AMPS |
|---|---|---|---|
| QWJOIST17X5240 | 16" x 5' | 47.53 | 0.208 |
| QWJOIST17X10240 | 16" x 10' | 95.06 | 0.417 |
| QWJOIST17X15240 | 16" X 5' | 151.62 | 0.625 |
Features and Benefits
Ultra-thin, conductive ink film technology, for existing floors
10 watts per sq ft
Staple between joists below subfloor, wire multiple panels together in parallel.
Cut to fit length
Great for 16 inch OC joist
Energy efficient: up to 5¢ per hour (based on 60 sq ft area)
Available in 120v/240v
installation Time - 45 minute installation time (based on 60 sq ft area)
UL listed for safety
Control temperature with an available floor sensing thermostat
